Effects of Tubing Degradation and Pump Position on Extracorporeal Circulation Performance
Introduction
Extracorporeal circulation (ECC) is an integral part of cardiac surgery. Yet the contact with artificial surfaces, mechanical stress, shear, and suction forces within the ECC pose a pronounced risk for damaging the corpuscular components of the blood. These suction forces may be reduced by a repositioning of the roller pumps employed below the reservoir. Furthermore, the repeated compression of the involved silicone tubing is likely to cause degradation. We present our observations regarding changes in the ECC performance following this degradation process.
Methods
In vitro experiments were performed in a standard as well as a simplified ECC setup and included measurements of pressure, effective flow, and tubing restoring force over a time frame of 12 hours with two different pump positions utilizing transit time flow measurement.
Results
Suction forces within the tubing could be significantly reduced by shifting the pump position below the reservoir. Regardless of the setup, the tubing showed significant loss of restoring force as well as effective flow over time.
Conclusions
A shift of the pump position within the ECC setup can be recommended to prevent blood damaging negative pressures. Further research is necessary to evaluate the exact cause of the reduction of restoring force over time as well as its risks for the patients. Finally, our results underline the importance of transit time flow measurements to collect reliable flow data.
